Hammond, Indiana Building Department 2026: Permits, Fees & Inspections

Hammond Building Permits & Inspections: What to Do First

If your property is inside the City of Hammond, Indiana, the Building Division of the Hammond Inspections Department is the local office responsible for building permits and construction inspections. It also manages contractor registration, while zoning approval is handled through the City’s Zoning Division.

Quick answer for 2026:

Start with the Hammond Building Division at Hammond City Hall, Room G1, 5925 Calumet Avenue, Hammond, IN 46320. The published phone number is 219-853-6317, and office hours are Monday-Friday, 8:00 a.m.-4:00 p.m. The City publishes downloadable permit forms rather than a clearly identified public online permit-submission portal.

Building DivisionInspections Department – Building Division
Building CommissionerRobert Vale
Address5925 Calumet Avenue, Room G1, Hammond, IN 46320
Phone219-853-6317
Office HoursMonday-Friday, 8:00 a.m.-4:00 p.m.
Zoning OfficeRoom G17 · 219-853-6397 ext. 3

Hammond Building Department Contact Information

The City’s permit office is formally the Building Division of the Inspections Department. The broader Inspections Department also includes Code Enforcement and works alongside the Zoning Division, which is important because many projects need more than one approval.

ServiceOffice / ContactWhat It Handles
Building permits Building Division · Room G1 · 219-853-6317 Construction, remodeling permits, inspections and contractor registration.
General Inspections Department 219-853-6316 / 219-853-6317 Building, unsafe structures, code enforcement and related inspection services.
Zoning Room G17 · 219-853-6397 ext. 3 Zoning districts, location approval, Improvement Location Permits and Board of Zoning Appeals matters.
Code Enforcement Inspections Department Property-maintenance issues, rental registration, reconnect inspections and enforcement matters.

The Building Division’s published office hours are 8:00 a.m.-4:00 p.m. Monday through Friday. The Zoning Division lists separate hours of 8:30 a.m.-4:30 p.m. Monday through Friday.

Do You Need a Building Permit in Hammond?

Hammond’s current building-permit application specifically includes roofing, roof tear-offs, doors and windows, siding, decks, fences, sheds, flat work, interior remodeling, exterior remodeling, attached and detached garages, in-ground pools, above-ground pools and new construction.

The municipal code also states that licensed contractors must obtain a permit before construction, alteration or repair of a building or structure when the project cost exceeds $300. Only homeowners doing their own work are issued homeowner permits under that provision.

There is an important conflict in the City’s published information.

Hammond Code §150.003 currently says a permit is required for contractor work costing more than $300, while the City’s Code Enforcement FAQ says permits are needed for work valued at $500 or more. That FAQ also says fences, decks and porches require zoning approval and a permit regardless of total value.

If your project falls between $301 and $499, do not assume it is exempt. Call the Building Division at 219-853-6317 before work begins.

Even inexpensive work can trigger approval when it affects zoning, structure, electrical wiring, plumbing, HVAC, a pool, deck, fence, garage or other regulated feature.

How to Apply for a Hammond Building Permit

  1. Confirm that the property is actually inside Hammond city limits.
    A Hammond mailing address does not by itself prove which government issues the permit. If you are unsure, give the Building Division the exact property address before preparing an application.
  2. Identify every part of the project.
    Separate the building work from electrical, plumbing and HVAC work. Hammond’s building permit form specifically states that the building permit does not include electrical, HVAC or plumbing.
  3. Check zoning before designing around a setback.
    For new construction, the City says an Improvement Location Permit must be issued by the Zoning Department before the building permit. Location approval may also matter for fences, decks, garages, sheds, pools and additions.
    Open the official Hammond Zoning Division page.
  4. Download the current permit form.
    Go to the City’s License/Permit Applications page and select the Building Permit Application.
    Open the building permit PDF directly.
  5. Complete the project details carefully.
    The form asks for the construction address, homeowner or contractor status, contractor contact information, property owner information, total cost of material and labor, building type, rental-property status, project category and a description of all work.
  6. If a contractor is applying, attach the signed contract.
    The City’s application specifically instructs contractors to attach a copy of the signed contract.
  7. Prepare the site sketch, plans and specifications.
    Hammond Code §150.003 says a permit application must be accompanied by a plat or sketch showing the proposed location and lot boundaries, plus plans and specifications showing the work to be performed.
  8. Complete any state review that applies.
    Projects subject to Indiana state building-plan review may require a state Construction Design Release before Hammond can issue the local permit. Check the Indiana DHS Building Plan Review information when working on applicable commercial, multifamily or other state-reviewed construction.
  9. Contact or visit the Building Division to file.
    The City publishes downloadable applications and its permit-counter address, but the reviewed Building Division pages do not identify a general online permit-submission system. Call 219-853-6317 if you need to confirm the current filing method before going to City Hall.
  10. Do not start regulated work until the required permit is issued.
    Starting without the required permit can lead to a stop-work order and additional fees.
Form-age note: The building permit PDF currently linked by the City shows a revision date of October 22, 2019. It remains the form published on Hammond’s permit page in 2026, but it is sensible to confirm that staff has not replaced it before submitting a major project.

What to Prepare Before You Apply

ItemWhy You May Need It
Property addressIdentifies the construction site and permitting jurisdiction.
Property-owner informationRequired on the City’s building permit form.
Contractor name and phoneRequired when a contractor performs the work.
Signed construction contractThe permit form instructs contractors to attach it.
Material + labor valueHammond calculates building permit fees from project valuation.
Plat or site sketchThe ordinance calls for lot boundaries and proposed location to be shown.
Plans and specificationsNeeded to explain the work being permitted.
Improvement Location PermitRequired before the building permit for new construction.
State Construction Design ReleaseRequired when the project is subject to Indiana state plan review.
Separate trade applicationsElectrical, plumbing and HVAC are not included in the basic building permit.

Zoning Approval Comes Before Some Building Permits

Hammond’s Zoning Division is located in Room G17 of City Hall and currently lists the phone number 219-853-6397 ext. 3.

The City’s most important published rule for new construction is simple: all new construction must receive an Improvement Location Permit from Zoning before the Building Permit is issued.

For an addition, garage, shed, deck, pool or fence, zoning is also worth checking before buying materials because setbacks, lot coverage, placement and district rules may affect where the improvement can be built.

The City currently publishes its zoning ordinance and district zoning-map PDFs through the Zoning Division. This is more useful than relying on an old address lookup or a third-party zoning map.

If your project is actually in nearby Crown Point rather than Hammond, the permitting authority is different. See our Crown Point, Indiana Building Department guide instead of filing with Hammond.

Hammond Building Permit Fees for 2026

Hammond’s current municipal code calculates the main building permit from the total project valuation. The ordinance defines valuation broadly to include labor, materials, subcontractors, permanent equipment or fixtures and job-supervision costs.

Building Permit FeePublished Amount
Total valuation $500-$15,000 $50 base fee + 1.75% of the contract amount
Total valuation $15,001 and above $120 base fee + 1.25% of the contract amount
Inspection fee – all projects $75
Red-tag inspection $50
Additional or special inspection $50
Subsequent inspection for same violation $50
Permit extension 50% of original permit cost
Reconnect-of-service inspection $50
Temporary occupancy permit $100
Certificate of occupancy $50

Plan-review charges

Plan TypePublished Review Fee
Industrial and commercial prints 10% of permit fee, minimum $150
Residential or other prints over $5,000 valuation 10% of permit fee, minimum $50

Wrecking permits and automatic/fire-sprinkler system installation permits are calculated in the same general manner as building permits based on total project valuation.

Starting without the required permit can become expensive.

The current fee ordinance adds $250 when a permit is obtained after a residential stop-work order and $500 following a commercial stop-work order, in addition to the normal permit charges.

Check Hammond Code §150.025 – Building Permit Fees

Electrical, Plumbing and HVAC Permits

Do not assume your building permit covers the trades. The City’s building application explicitly says it does not include electrical, HVAC or plumbing permits.

Plumbing permit fees

The Building Division publishes the following plumbing charges:

  • $50 minimum, including the first three fixtures.
  • $25 for each additional fixture.
  • $50 for each water service.
  • $50 for each building or storm sewer, sewer tap, or opening of a street, alley, public right-of-way or other public property.

The City also states that a State of Indiana plumbing license is required to perform plumbing work in Hammond.

Heating and HVAC permit fees

Heating permit fees are published as $50 for the first $1,000 of installation, repair or alteration cost, plus $11 for each additional $1,000. The Building Division states that if the contractor is also performing air-conditioning work, an additional $10 electrical permit charge applies.

Electrical permit fees

Electrical WorkPublished Fee
New service $80 for the first $1,000 + $11 for each additional $1,000
Upgrade or repair to existing service $60 for the first $1,000 + $11 for each additional $1,000

For unusual project values or partial-thousand-dollar amounts, ask the permit office to calculate the final charge rather than guessing.

How Hammond Building Inspections Work

The Building Division performs inspections on permitted construction and remodeling within Hammond city limits. Hammond Code §150.003 authorizes inspections needed to verify compliance with the permit, plans and applicable code.

The building permit application also puts an important responsibility on the contractor: the contractor is responsible for inspections.

  1. Keep the permit active and available for the project.
  2. Ask the Building Division which inspection stages apply when the permit is issued.
  3. Finish the work required for that inspection stage.
  4. Do not cover work that still needs to be inspected.
  5. Contact the Building Division at 219-853-6317 to confirm the current inspection-request procedure.
  6. Correct failed items before requesting another inspection.
  7. Obtain the applicable final inspection and certificate of occupancy before occupancy when required.

The City’s current public pages do not publish a universal online inspection-scheduling workflow or a guaranteed inspection turnaround, so avoid relying on third-party websites that promise a fixed inspection time.

Before digging

The City’s permit form instructs applicants to arrange utility locations at least two days before digging. It lists 800-382-5544 for utility-location service, Hammond Water Department at 219-853-6429, and Public Works at 219-853-6431.

Contractor Registration and Licensing

Hammond requires contractors, subcontractors and specialty contractors working within city limits to be registered with the City. The Building Division also publishes a searchable list of licensed contractors, which is useful before a homeowner signs a contract.

Hammond Code currently lists the following building-contractor licensing charges:

Contractor ItemFee
Initial annual building contractor license$200
Annual renewal within 30 days of expiration$100
Renewal more than 30 days lateAdditional $100 late fee
Initial contractor examination$100
Re-examination$50 per retest

The City’s Building Division also publishes insurance and bond requirements for applicable contractors. Its electrical, heating and plumbing information references liability insurance of $100,000/$300,000 and a $5,000 license/permit bond recorded through the Lake County Recorder. Requirements vary by trade, so contractors should use the current City application rather than relying on an old license from another municipality.

Open Hammond contractor and permit applications

Which Building Codes Apply in Hammond?

Hammond’s ordinance incorporates Indiana’s state building rules, and the Indiana Department of Homeland Security maintains the official list of codes currently in effect.

CodeCurrent Indiana Base Edition
Indiana Building Code 2014 Indiana Building Code, based on the 2012 International Building Code with Indiana amendments
Indiana Residential Code 2020 Indiana Residential Code, based on the 2018 International Residential Code with Indiana amendments

Electrical, plumbing, mechanical, fire, energy, swimming-pool and fuel-gas work can be subject to additional currently effective Indiana rules. Do not assume that the newest model code sold nationally is automatically the code legally in force in Hammond.

For a broader explanation of how local adoption works, see our city building code guide.

Other Hammond Inspection Services That May Matter

NIPSCO gas or electric reconnect inspection

The City’s Code Enforcement FAQ says a reconnect inspection requires identification and, when applicable, proof of ownership. A tenant should bring a signed lease plus a driver’s license or state ID.

The published reconnect inspection charge is $50 for gas and/or $50 for electric. If you need both services restored, confirm the total charge with the office before visiting.

Rental registration

For landlords, the Code Enforcement Division publishes a rental-registration deadline of April 15 and a fee of $5 per unit. Because rental rules and annual fees can change, use the current Code Enforcement page before filing.

Demolition, signs and vacant properties

Hammond’s permit page also provides separate applications and procedures for demolition, signs, vacant-property registration, plumbing, electrical and HVAC work. Use the specific form that matches your project rather than trying to place every activity on the basic building application.

Common Mistakes That Cause Extra Trips or Delays

ProblemBetter Approach
Using the $500 FAQ threshold for a $400 contractor project The municipal code says more than $300. Call the Building Division because the City’s own published sources conflict.
Applying for a building permit before zoning on new construction Obtain the Zoning Division’s Improvement Location Permit first.
Assuming one permit covers all trades Prepare separate electrical, plumbing and HVAC applications where applicable.
Leaving out the contractor’s signed contract The City’s building form specifically requires contractors to attach it.
Using only construction cost of materials The permit valuation can include labor, materials, subcontractors, fixtures/equipment and supervision.
Hiring a contractor without checking Hammond credentials Use the City’s licensed-contractor table before work starts.
Covering work before inspection Confirm required inspections when the permit is issued and keep regulated work accessible.
Assuming a Hammond postal address means Hammond jurisdiction Confirm municipal limits before filing or paying fees.

Hammond, Indiana Building Department FAQs

1. Where is the Hammond, Indiana Building Department?

The Building Division is in Hammond City Hall, Room G1, 5925 Calumet Avenue, Hammond, IN 46320. The published phone number is 219-853-6317.

2. What are the Hammond Building Division office hours?

The City currently lists Building Division hours as Monday through Friday from 8:00 a.m. to 4:00 p.m.

3. How do I get a Hammond building permit?

Confirm the property is inside Hammond, identify the permit type, obtain zoning approval when required, download the official application, prepare the site sketch and plans, attach a signed contract if a contractor is applying, and contact the Building Division to file the completed package.

4. Does Hammond have an online building permit application system?

The City’s reviewed Building Division pages publish downloadable PDF applications but do not identify a general public online permit-submission portal. Call 219-853-6317 to confirm the current filing method.

5. When is a building permit required in Hammond?

Hammond Code §150.003 states that licensed contractors must obtain permits for construction, alteration or repair costing more than $300. The City’s Code Enforcement FAQ instead says $500 or more, so projects between $301 and $499 should be confirmed directly with the Building Division. Certain projects such as decks and fences can require approval regardless of value.

6. How much is a Hammond building permit?

For valuations of $500-$15,000, the published fee is $50 plus 1.75% of the contract amount. For $15,001 and above, it is $120 plus 1.25%. The ordinance also lists a $75 inspection fee for all projects, with plan-review, trade, reinspection or other charges potentially applying.

7. Do I need zoning approval before a Hammond building permit?

For new construction, yes. The Hammond Zoning Division states that all new construction must receive an Improvement Location Permit before the Building Permit. Other projects may also need zoning review for setbacks or location.

8. Does the building permit include electrical, plumbing and HVAC work?

No. Hammond’s official building permit form specifically states that it does not include electrical, HVAC or plumbing. Separate trade permits should be obtained when those systems are part of the project.

9. Do contractors need a Hammond license or registration?

Yes. The Building Division states that contractors, subcontractors and specialty contractors working within Hammond city limits must be registered with the City. The City also publishes a licensed-contractor lookup list.

10. What building code does Hammond, Indiana use in 2026?

Hammond incorporates Indiana’s state building rules. Indiana currently lists the 2014 Indiana Building Code, based on the 2012 IBC with Indiana amendments, and the 2020 Indiana Residential Code, based on the 2018 IRC with Indiana amendments, among its codes in effect.

Before You Start Work

The fastest way through Hammond’s permit process is to solve the questions in the right order: jurisdiction → zoning → permit type → documents → contractor credentials → fees → inspections. A few minutes spent confirming those items can prevent a failed application, unnecessary City Hall visit or stop-work order.

For project-specific questions, use the official Hammond Building Division or call 219-853-6317. USBuilding.org is an independent informational resource and is not affiliated with the City of Hammond.

Leave a Comment