Los Angeles Building Inspections, Permits and LADBS Services
If you already have a permit and simply need an inspection, you usually do not need to visit a government counter. The most direct route is the official LADBS Inspection page, where you can request an inspection, check inspection status, cancel an appointment, request a virtual inspection, or access off-hour services.
If you are still at the permit stage, LADBS separates relatively simple work that qualifies for an Express Permit from projects that require drawings and plan review. This guide explains both processes, but it puts extra emphasis on the inspection questions that commonly cause delays for Los Angeles homeowners, contractors and property managers.
Los Angeles Building Inspection Department: Quick Information
| Need | What to use | Important detail |
|---|---|---|
| Responsible agency | Los Angeles Department of Building and Safety | Commonly called LADBS |
| General City assistance | 3-1-1 | Use inside the City of Los Angeles |
| Calling from outside Los Angeles | (213) 473-3231 | General City/LADBS routing |
| Inspection request | LADBS Inspection Services | Permit must already be issued |
| Express permit | PermitLA | For eligible work that does not require plan review |
| Plans and plan review | ePlanLA | Used when plans require review |
| Property and zoning research | ZIMAS | Useful before applying |
| Permit/property records | LADBS PRISM | Search historical records and permits |
First Check: Is the Property Actually in the City of Los Angeles?
This is one of the most important steps and one of the easiest to overlook.
Use ZIMAS and search the project address. If the property is not recognized as a City of Los Angeles parcel, verify the responsible permitting agency before submitting anything.
- Open ZIMAS.
- Enter the exact project address.
- Open the parcel result and review the property and jurisdiction information.
- If the property is not within Los Angeles city jurisdiction, identify the correct city or Los Angeles County agency.
- Only then start the permit or inspection process.
For a broader overview of the City process, see our Los Angeles Building Department guide. If the property is in an unincorporated Los Angeles County community, the process can be very different; our Altadena Building Department guide is one example.
How to Schedule a Los Angeles Building Inspection
Once the permit has been issued and the relevant stage of construction is ready, request the inspection before the work is concealed.
Online inspection request: micro steps
- Find the issued permit number, job-site address and inspection type you need.
- Open the official LADBS Inspection page.
- Select Schedule An Inspection or the current Request Inspection option.
- Enter the permit and property information requested by the City system.
- Select the appropriate inspection type. Do not choose a generic building inspection if the work actually requires plumbing, electrical, mechanical or another trade inspection.
- Submit the request and retain the confirmation information.
- Check the inspection status before relying on the appointment, especially if access to the property requires someone to be present.
Scheduling by phone
LADBS also publishes its Automated Inspection Request System at (888) 524-2845 for callers within Los Angeles County and (213) 482-0000 from outside the county. You can also use 3-1-1 or (213) 473-3231.
LADBS states that inspectors generally perform regular field inspections on weekdays. Assigned inspectors are also typically available by phone from about 7:00 AM to 8:30 AM, which can be useful when you need project-specific clarification before the field day begins.
What to Have Ready Before the LADBS Inspector Arrives
A scheduled inspection does not help if the inspector cannot see the work or the required documents are missing. LADBS specifically tells customers to have the following available:
- A copy of the issued permit.
- The approved plans when plan review was required.
- The Building Card, commonly referred to as the B-8, for applicable building permits.
- Safe access to the areas being inspected.
- Any necessary equipment, such as a suitable ladder when access is required.
Keep the construction stage visible. For example, do not pour concrete before the required footing or reinforcement inspection, and do not close walls before required framing, plumbing, electrical or mechanical rough inspections have been approved.
Which Los Angeles Inspection Do You Need?
LADBS does much more than one generic “building inspection.” The correct inspection depends on the permit and the work being performed.
| Inspection | Typical scope |
|---|---|
| Residential | One- and two-family dwellings, including additions, alterations, pools, retaining walls, accessory structures and demolitions. |
| Building | Commercial, industrial and residential buildings with more than two units, including integral non-mechanical components and zoning compliance. |
| Electrical | Electrical wiring, panels, equipment and permitted electrical systems. |
| Plumbing | Water, waste, vent, gas and other permitted plumbing work. |
| Mechanical / HVAC | Heating, cooling, ventilation and mechanical systems. |
| Fire sprinkler | Permitted fire-sprinkler installations and related work. |
| Grading | Grading operations and certain complex residential or commercial earthwork. |
| Elevator / pressure vessel | Elevators, boilers, pressure vessels and regulated equipment. |
| Green building | Applicable green-building measures and project requirements. |
| Sign / temporary event | Permitted sign work and qualifying temporary special events. |
LADBS’s published Services and Programs material also distinguishes residential inspections for one- and two-family dwellings from commercial inspection work covering non-residential and multifamily buildings.
What Happens If a Los Angeles Inspection Does Not Pass?
A failed inspection is usually a request to correct specific work, not the end of the permit. Review the inspector’s correction notice carefully and fix every cited item before requesting the reinspection.
Common avoidable problems include:
- Work being covered before inspection.
- Approved plans not available at the site.
- Construction that does not match approved drawings.
- Required plumbing, electrical or mechanical rough work not complete.
- Unsafe or blocked access to the inspection area.
- Required equipment not available.
- Previously cited corrections remaining incomplete.
LADBS can assess an additional or “extra trip” inspection charge when an inspection cannot be completed because of customer-side problems. Rather than requesting another inspection immediately, complete the correction list first.
Reinspection steps
- Read every item on the correction notice.
- Compare the correction with the approved plans and permit scope.
- Complete all required corrections.
- Keep the corrected work exposed where inspection is required.
- Request the proper follow-up inspection.
- Keep the correction notice available for reference.
Virtual, Off-Hour and Saturday Inspections
Virtual inspection
LADBS offers real-time video inspections for qualifying work. You need a valid permit, a compatible smartphone or tablet, internet access and approval for the requested inspection type.
Examples LADBS currently identifies as potentially eligible include:
- Smoke and carbon-monoxide detectors.
- Residential photovoltaic systems.
- Water-heater replacements.
- Electrical-panel replacements.
- HVAC replacements.
- Temporary power poles.
- Patios and decks.
- Reroofing.
- Window replacements.
- Minor pad footings.
- Masonry walls.
- Reinspection of certain corrections.
Start at the official Virtual Inspection page. LADBS determines whether the specific inspection qualifies.
Saturday and off-hour inspections
LADBS also provides off-hour inspection services. Department guidance states that Saturday requests should generally be made before 1:00 PM on the preceding Friday and are normally treated as off-hour inspections.
The LADBS FAQ currently lists an off-hour inspection fee of $318, while other department guidance discusses after-hours costs using hourly and travel-fee language. Because these official descriptions are not identical and fees can change, verify the amount displayed in the official booking/payment system before scheduling.
No Permit Yet? Get the Permit Before Requesting Inspection
An inspection request normally comes after permit issuance. LADBS uses two major online paths:
Open PermitLA
Open ePlanLA
Permit process in practical order
- Confirm the property is inside Los Angeles city jurisdiction.
- Check zoning and parcel information in ZIMAS.
- Define exactly what is being built, altered, repaired or demolished.
- Determine whether the work qualifies for an Express Permit or needs plan review.
- Create or sign in to the required City account.
- Use PermitLA for eligible express work or ePlanLA when plans must be reviewed.
- Resolve plan-check corrections and outside-agency clearances when required.
- Pay the applicable permit fees and obtain the issued permit.
- Begin permitted construction and request inspections at the appropriate stages.
- Request final inspection after the permitted work is complete.
Larger projects may also involve City Planning, Fire, Bureau of Engineering, LADWP, sanitation, transportation, housing or other agencies. The exact clearance list depends on the property and proposed work.
How to Check a Los Angeles Permit or Inspection Status
If you already have an active project, do not start a second permit application simply because you cannot remember the current status.
Start from LADBS Plan Review & Permitting and use the permit-status or Permit and Inspection Report tools.
Keep these details handy:
- Job-site address.
- Permit number.
- Application or plan-check number when applicable.
- Inspection type.
If the issue is inspection-specific, use the Inspection page’s Check Inspection Status option.
Search Old Los Angeles Building Permits and Inspection Records
LADBS introduced PRISM — Permit & Records Information Search Module in September 2026. It is now one of the most useful starting points for researching an existing Los Angeles property.
PRISM search steps
- Open LADBS PRISM.
- Search by property address, parcel information, legal description or document number.
- Open the correct parcel or property result.
- Review available records and timeline entries.
- Open the individual document when a scanned record is available.
LADBS says its record collection can include building permits dating back to 1905, Certificates of Occupancy dating back to 1940, plot plans, geology and soils reports, affidavits, approved building plans, administrative approvals and selected electrical, plumbing and mechanical records.
Older property history is useful before remodeling because existing construction is not necessarily legal merely because it has existed for years.
Los Angeles Building Inspection Offices
Most routine requests can begin online, but knowing the correct physical office can matter when you need records, inspector contact information or in-person assistance.
| Location | Address | Useful for |
|---|---|---|
| Metro / Downtown | 201 & 221 N. Figueroa St., Los Angeles, CA 90012 | Permits, plan review, records, inspections, code enforcement and case management. |
| Van Nuys | 6262 Van Nuys Blvd., Van Nuys, CA 91401 | Permits, records, plan review and inspection services. |
| West LA inspection office | 11620 Wilshire Blvd., Los Angeles, CA 90025 | Inspection services for the West Los Angeles area. |
| San Pedro | 638 S. Beacon St., San Pedro, CA 90731 | Permits, plan review, inspections and code enforcement. |
| Vanowen inspection office | 19040 Vanowen St., Reseda, CA 91335 | Inspection services. |
The Metro location’s inspection operations are primarily at 221 N. Figueroa, while permit, record and plan-check services are distributed between the two Figueroa Plaza buildings.
Published Metro and Van Nuys counter hours are generally Monday, Tuesday, Thursday and Friday from 7:30 AM to 4:30 PM, and Wednesday from 9:00 AM to 4:30 PM. The City notes that Qmatic tickets are not issued after 4:00 PM. Check the official LADBS locations page before traveling because service availability varies by office.
Los Angeles Building Codes in 2026
Los Angeles moved into its 2026 local code cycle on January 1, 2026. LADBS’s current forms and correction sheets reference the 2026 Los Angeles Building Code, 2026 Los Angeles Residential Code and related Los Angeles technical codes.
The statewide foundation is the 2025 California Building Standards Code, which became effective for the 2026 cycle, together with Los Angeles amendments and local requirements. For the statewide framework, see our California Building Code 2026 guide.
This matters during inspection because an inspector is comparing the field work not only with the permit and approved plans but also with the applicable adopted codes and project-specific conditions.
Do not assume that a neighboring city’s rules are identical. For example, a property in Beverly Hills uses that city’s own Building & Safety process rather than LADBS. See our Beverly Hills Building Department guide if the property is within Beverly Hills jurisdiction.
Report Unpermitted Work or a Building-Code Violation
LADBS also performs code-enforcement work. Potential complaints can involve construction without required permits, unsafe building conditions, improper uses and other code issues.
- Open the official LADBS website.
- Choose the Enforcement section.
- Select Report Violation.
- Enter the property address accurately.
- Choose the complaint category that best describes the problem.
- Describe the observed condition factually.
- Submit the complaint and retain the reference information for status checking.
Multifamily housing complaints can involve the Los Angeles Housing Department rather than LADBS depending on the issue, so use the City’s routing instructions rather than assuming every apartment complaint belongs to Building and Safety.
Final Inspection and Certificate of Occupancy
When all permitted construction is complete, request the final inspection. Passing earlier rough inspections does not automatically close the permit.
LADBS’s homeowner permit-and-inspection guidance explains that final approval comes after the required construction has been completed and inspected. Depending on the project, a Certificate of Occupancy may then be issued. Not every remodel or permit receives a new Certificate of Occupancy.
Keep your final approval, Building Card and Certificate of Occupancy when one is issued. Those records can become valuable later during a sale, refinance or future construction project.
Before You Request Your Inspection: 60-Second Checklist
- Permit is issued, not merely submitted.
- Correct inspection type has been selected.
- Required work is complete enough to inspect.
- Nothing requiring inspection has been concealed.
- Approved plans are at the site.
- Permit and Building Card are available.
- Access to every relevant area is clear.
- Required ladder or other access equipment is available.
- Previous correction items have been completed.
- Someone responsible can provide access if the site is locked.
Frequently Asked Questions
1. How do I schedule a Los Angeles building inspection?
Use the official LADBS Inspection page and select the inspection-request service. You can also call 3-1-1 within Los Angeles or use the City’s published inspection phone services. Have the permit number, project address and required inspection type ready.
2. What time should I request a LADBS inspection for the next business day?
LADBS FAQ information says requests made before 4:00 PM can be scheduled for the next business day, while separate department guidance advises requesting regular field inspections one day in advance before 2:00 PM. Submitting before 2:00 PM gives you more scheduling margin.
3. What documents do I need for a Los Angeles building inspection?
Have the issued permit, approved plans when plan review was required, the Building Card for applicable building permits and any equipment needed for safe inspection access.
4. Can I cover framing or wiring before the LADBS inspection?
No. Work that requires inspection should remain visible until the required inspection has been performed and that stage has been accepted. Covering work early can lead to corrections and additional work to expose it again.
5. Can LADBS perform a virtual inspection?
Yes, for qualifying inspection types. Examples published by LADBS include certain residential solar work, replacement water heaters, HVAC or electrical panels, reroofing, windows, patios, decks, masonry walls and some correction reinspections. LADBS must confirm eligibility.
6. How do I check my Los Angeles inspection status?
Open the LADBS Inspection page and use Check Inspection Status. For broader permit activity, use the permit-status and Permit and Inspection Report services available through the LADBS permitting section.
7. How do I search old Los Angeles building permits?
Use LADBS PRISM and search by address, parcel information, legal description or document number. LADBS states that building permits dating to 1905 and Certificates of Occupancy dating to 1940 may be available in its records collection.
8. Do I need a permit before requesting a Los Angeles inspection?
Yes, construction inspections are tied to permitted work. Obtain the appropriate permit first. PermitLA handles qualifying express work, while projects requiring plan review generally use ePlanLA.
9. Is LADBS the building department for every Los Angeles County property?
No. LADBS serves the City of Los Angeles. Other incorporated cities and unincorporated Los Angeles County communities can have different permitting and inspection agencies. Verify jurisdiction before applying.
10. What happens after the final LADBS inspection?
After the required work and inspections are approved, the permit can move toward final completion. A Certificate of Occupancy is issued for projects where one is required, but not every permit or remodel receives a new Certificate of Occupancy.
Official Los Angeles Resources
- LADBS Inspection Services — schedule, check or cancel inspections.
- Plan Review & Permitting — permit applications, fee tools and status services.
- PermitLA — qualifying Express Permits.
- ePlanLA — electronic plan review and permit applications requiring plans.
- ZIMAS — zoning and parcel research.
- LADBS PRISM — permits and property records.
- LADBS Locations & Offices — current service-center information.
Independent guide: USBuilding.org is not the Los Angeles Department of Building and Safety and does not issue permits or approve inspections. Permit requirements, fees, inspection availability and office schedules can change. Use the linked City of Los Angeles services for the final request, payment or official project determination.