Knox County & Knoxville, TN Building Department 2026: Permits, Inspections & Services

Knox County & Knoxville Building Permits: Start With the Right Office

Quick answer: There are separate building-permit authorities in the Knoxville area. If the property is inside Knoxville city limits, start with the City of Knoxville Plans Review & Inspections Department. If it is in unincorporated Knox County, use Knox County Codes Administration and Enforcement. Properties inside the Town of Farragut use Farragut’s own permitting and inspection system.

This distinction matters more than it may seem. A property can have a Knoxville mailing address and still sit outside Knoxville city limits. That means typing “Knoxville” into a permit search is not enough to identify the correct building department.

The safest first move is to check the actual parcel jurisdiction before submitting plans, paying a permit fee or creating an application.

Which Building Department Handles Your Property?

Do this before deciding which permit application to complete.

Property location Building authority Where to start
Inside City of Knoxville limits City of Knoxville Plans Review & Inspections Official City department
Unincorporated Knox County Knox County Codes Administration and Enforcement Official Knox County Codes
Town of Farragut Town of Farragut Building & Fire Codes Official Farragut permitting page

Fastest way to check your jurisdiction

  1. Open KGIS Maps.
  2. Search the exact property address.
  3. Open the map controls and find Planning and Zoning Maps.
  4. Turn on the zoning layer.
  5. The City of Knoxville explains that city parcels appear in a warm yellow/ivory tint, while county parcels appear white.
  6. If the parcel is in Farragut, switch to the Town of Farragut permitting process rather than using either Knoxville City or unincorporated Knox County instructions.
Local practical tip: The City and County permit offices are both in the City-County Building at 400 Main Street. They are not the same permitting department. Confirm the jurisdiction before walking into the building so you do not end up at the wrong counter.

Knoxville & Knox County Building Department Contacts

City of Knoxville

Department: Plans Review & Inspections

Address: 400 Main Street, Suite 475, Knoxville, TN 37902

Phone: 865-215-4311

Email: bldginspections@knoxvilletn.gov

Office: Monday-Friday, 8:00 a.m.-4:30 p.m.

Front desk: Monday-Friday, 8:30 a.m.-3:30 p.m.

Open official department page

Unincorporated Knox County

Department: Codes Administration and Enforcement

Address: 400 Main Street, Suite 547, Knoxville, TN 37902

Phone: 865-215-2325

Online application: Knox Permit Portal

Open Knox Permit Portal

Watch for payment scams: The City of Knoxville has published a warning about scam emails requesting permit-fee payments. If a payment request looks unusual, do not follow an unfamiliar payment link. Open the City’s official permit/payment page yourself or call 865-215-4311 to verify the charge.

How to Apply for a City of Knoxville Building Permit

For a property confirmed to be inside Knoxville city limits, most applicants will work through the City’s online permitting and electronic plan-review systems.

  1. Identify the project category. Open the Plans Review & Permits page. Residential categories include new construction, additions, alterations/repairs and demolition.
  2. Create or sign in to your Citizen Access account. Use the My Project Portal. For a new account, select Register Now, accept the terms, add your contact information and finish registration.
  3. Start the application. In Citizen Access, choose the permit area and select Create an Application. Enter the project address, scope, applicant details and requested project information carefully.
  4. Provide plans and supporting documents. Projects requiring formal plan review may move into the City’s KnoxPlans electronic review system. Upload drawings and supporting documents according to the instructions provided for your application.
  5. Respond to review comments. Zoning, Engineering, Building, Fire and utilities may be involved depending on the project. Do not create a second application simply because corrections are requested; continue through the assigned project workflow.
  6. Pay assessed fees. Use the official City payment system. The City’s fee calculator can provide an estimate, but it does not include every possible engineering or project-specific charge.
  7. Wait for permit issuance. Submission, plan approval and fee payment are not substitutes for an issued permit. Confirm that the permit has actually been issued before permit-required construction begins.
  8. Request inspections as work progresses. Do not conceal work that requires an inspection.
  9. Complete final approval. Projects requiring a Certificate of Occupancy must pass applicable final inspections before occupancy.

How long does City plan review take?

The City publishes benchmark turnaround times after complete plans are submitted. These are targets, not guaranteed approval dates.

City project type Published review benchmark
Residential 7 days
Commercial under $500,000 14 days
Commercial $500,000-$20 million 21 days
Commercial over $20 million About 30 days

A correction cycle, incomplete plans, zoning problem, engineering issue or other agency review can increase the total time before a permit is ready.

How to Apply in Unincorporated Knox County

If KGIS confirms that the property is outside Knoxville and Farragut municipal permitting jurisdiction, start with Knox County Codes Administration and Enforcement.

  1. Open the official Knox Permit Portal.
  2. Create an account or sign in. Keep the account credentials because you may need the same project information later for tracking and inspections.
  3. Choose the correct permit type. Enter the physical project address rather than relying only on a mailing-city name.
  4. Enter the project scope and valuation. Permit fees can depend on project valuation, so the cost information should represent the construction work accurately.
  5. Upload required plans and documents. New buildings, additions and other structural work may require a site plan and construction documents.
  6. Resolve address, zoning, septic or site requirements. Do this before expecting final building approval.
  7. Submit the application and respond to corrections.
  8. Pay the assessed permit fees through the authorized County process.
  9. Confirm permit issuance before starting regulated work.
  10. Use the County inspection system for required inspection stages and final approval.
Worth doing early: For vacant land or new construction, Knoxville-Knox County Planning’s address request/certification form requires a site plan showing property lines, structure locations and driveway access. Handling an address issue before plan review can prevent an avoidable stop later.

Projects That Commonly Need Building Department Review

The exact permit requirement depends on jurisdiction and project scope. Do not assume a project is exempt simply because it is small or because a contractor describes it as a repair.

Project What to verify before starting
New house Building permit, site plan, zoning, utilities/septic, trade permits and inspections
Home addition Building permit, setbacks, structural plans, energy requirements and trades
Interior remodel Whether walls, structural systems, plumbing, wiring, HVAC or occupancy are changing
Deck or porch Building permit, setbacks, footings, framing, guards, stairs and attachment details
Swimming pool Building/zoning approval, barrier requirements, electrical work and inspections
Accessory structure Size, setbacks, lot coverage, structural requirements and applicable permit threshold
Commercial alteration Building review, occupancy, accessibility, egress, fire, MEP and zoning
Demolition Demolition permit, utilities and any required documentation
Change of business/use Zoning plus possible change-of-use/occupancy review even when construction is limited

For background on why a city or county can use different code editions and amendments, see our 2026 city building code guide. For another East Tennessee example, our Anderson County building code guide shows how nearby jurisdictions can still use a different adoption process.

Knoxville & Knox County Building Permit Fees in 2026

There is no single flat “Knoxville building permit fee.” City of Knoxville and unincorporated Knox County use different fee schedules.

City of Knoxville published development fees

City fee item Published method
IRC plan review 0.025% of project valuation, $50 minimum; $35 minimum for qualifying non-habitable accessory structures, decks and pools
Building permit up to $500,000 valuation 0.55% of project valuation, $50 minimum
$500,000.01-$2 million $2,750 + 0.45% of valuation over $500,000
$2,000,000.01-$20 million $9,500 + 0.35% of valuation over $2 million
Over $20 million $72,500 + 0.25% of valuation over $20 million
Stand-alone mechanical/electrical/plumbing 0.5% of trade valuation, $55 minimum
Permit renewal 25% of original permit fee; $50 minimum, $1,000 maximum
Credit-card processing 2.75% added to fee total

The City states that its online fee calculator is an estimate and may not include Engineering or other project-specific charges.

Unincorporated Knox County published fee schedule

Knox County’s published Code Administration fee schedule is effective July 1, 2023. The County also adopted use of updated ICC Building Valuation Data, and beginning July 1, 2024, the valuation for R-3 one- and two-family Type VB dwellings is calculated using a 60% factor of the current Building Valuation Data figure.

Project valuation County building permit fee formula
Up to $2,000 $50
Over $2,000 to $50,000 $50 for first $2,000 + $5 per additional $1,000 or fraction
Over $50,000 to $100,000 $290 for first $50,000 + $4 per additional $1,000 or fraction
Over $100,000 to $500,000 $490 for first $100,000 + $3 per additional $1,000 or fraction
Over $500,000 to $1 million $1,690 for first $500,000 + $2 per additional $1,000 or fraction
Over $1 million $2,690 for first $1 million + $1.50 per additional $1,000 or fraction

The published County schedule also lists a $25 technology access fee for most permit types, plan-review fees ranging from $50 to $500 based on valuation, $50 residential demolition, $100 commercial demolition, $50 reinspection/extra requested inspection and a $50 permit-renewal fee.

View the official Knox County fee schedule PDF.

Fee reminder: Published schedules are useful for budgeting, but the amount assigned to an actual permit can include plan review, engineering, trade, technology or other project-specific charges. Use the amount shown by the responsible government office before paying.

Building Codes Used in Knoxville and Knox County in 2026

This is another important city-versus-county difference. The two jurisdictions are not currently on the same model-code cycle.

City of Knoxville current construction codes

Code City-published edition
International Building Code2024 IBC
International Residential Code2024 IRC
International Existing Building Code2024 IEBC
International Fire Code2024 IFC with local amendments
International Plumbing Code2024 IPC
International Mechanical Code2024 IMC
International Fuel Gas Code2024 IFGC
Swimming Pool & Spa Code2024 ISPSC with local amendments
Energy Conservation Code2018 IECC
Property Maintenance Code2018 IPMC
National Electrical Code2023 NEC with local amendments
Accessibility2017 ICC A117.1

Check the City’s current construction-code page before finalizing plans.

Unincorporated Knox County codes

The current Knox County Code of Ordinances lists the 2018 International Building Code and 2018 International Residential Code, together with county amendments. Chapter 10 also identifies 2018 editions of the fuel-gas, property-maintenance, mechanical, plumbing, existing-building, energy and other adopted International Codes.

Read Knox County Chapter 10 — Buildings and Building Regulations.

Design tip: Do not tell an architect, engineer or contractor only that the project is “in Knoxville.” Give them the physical address and confirm whether it is City of Knoxville, unincorporated Knox County or Farragut. In 2026, that jurisdiction decision can change the code edition used for plan review.

How Building Inspections Work

The required inspection list depends on the permit, but common construction checkpoints can include foundation or footing work, underground utilities, rough trades, framing, insulation and final inspections. Follow the inspection sequence attached to your permit rather than relying on a generic checklist.

City of Knoxville inspections

  1. Make sure the permit has been issued.
  2. Complete only the work allowed before the next required inspection.
  3. Open the City’s Plans Review & Inspections page.
  4. Select Inspections and then the inspection-request service.
  5. Choose the permit and correct inspection type.
  6. Provide access information where needed.
  7. Do not cover regulated work until the applicable inspection is complete.
  8. Resolve corrections and request reinspection when necessary.

The City also publishes a daily inspections list. For structures requiring occupancy approval, the project must reach the required final-inspection stage before the Certificate of Occupancy is issued.

Knox County inspections

For unincorporated County permits, keep the permit number available and use the County’s inspection resources connected to the project.

Open the Knox County Permit Inspection Lookup.

If an inspection type is unclear or a permit is not appearing correctly, contact Codes Administration at 865-215-2325 rather than guessing which inspection should be requested.

How to Search Knoxville Building Permits and Records

City permit search

The City of Knoxville provides an official permit/record search. Records can be searched using a full record number, property address or parcel information.

  1. Open the City Records & Reports page.
  2. Select Permit / Record Search.
  3. If you know it, enter the full record number for the narrowest result.
  4. Otherwise search by address or parcel.
  5. If too many records appear, narrow the date or street-number range.
  6. Open the matching record and check the permit type, status and related information.

The City notes that address searches are limited to 200 results, with newer records generally shown first.

County permit and inspection records

For unincorporated property, begin with the Knox County permit and inspection systems rather than the City record portal. Use the property address, permit number or other identifying details available for the record.

If you are researching an older property before buying or remodeling it, compare the permit history with the work you can physically see. An addition, converted space or major alteration that cannot be matched to a permit record is worth asking the responsible codes office about before beginning new work.

Zoning, Addresses, Septic & Site Approvals

A building permit does not solve every property-development issue. Zoning, grading, drainage, septic, driveway access, utilities, flood conditions and other approvals can exist alongside the building permit.

Address certification for new development

Knoxville-Knox County Planning’s address request/certificate form asks for parcel information and requires a site plan for new construction or vacant property. The plan should show property lines, structures and driveway access.

This is especially useful to handle early when a previously vacant parcel does not yet have a dependable project address.

Septic property

Knox is one of Tennessee’s contract counties for septic-system administration. If a property is not served by public sewer, treat septic approval as a separate project item rather than assuming the building permit automatically covers it.

The Tennessee Department of Environment and Conservation states that a septic construction permit is required for installation or repair of a subsurface sewage disposal system. Site information, property layout and soil information may be required depending on the system.

Tennessee septic-system permit information

Commercial projects and fire review

For City of Knoxville projects, a significant process change took effect for newer building permits: beginning November 1, 2025, Plans Review & Inspections took over review of new construction and renovation projects under the current fire-code process, including relevant alarm and sprinkler shop drawings. The Fire Marshal’s Office remains involved in acceptance/operational testing and final building approval where applicable.

Before You Submit: Practical Knoxville Permit Checklist

  • Confirm whether the parcel is in Knoxville, unincorporated Knox County or Farragut.
  • Write down the parcel ID and exact project address.
  • Check current zoning and required setbacks.
  • Identify the exact building, trade and site permits needed.
  • Confirm the code edition used by the correct jurisdiction.
  • Prepare a dimensioned site plan when applicable.
  • Prepare building plans and structural information required for the scope.
  • Check whether a Tennessee-licensed design professional is required.
  • Resolve septic or sewer questions before construction.
  • Check driveway, grading, drainage or site-development requirements.
  • Create the correct permit-portal account.
  • Upload documents using the portal’s required format and naming rules.
  • Respond to review comments in the existing application.
  • Pay only through an official government payment path.
  • Confirm the permit is issued before beginning permit-required work.
  • Keep approved plans and permit information available during construction.
  • Schedule inspections before work is covered.
  • Complete all final inspections and occupancy requirements.

Knox County & Knoxville Building Department FAQs

1. Which building department handles a Knoxville, Tennessee address?

It depends on the parcel’s actual jurisdiction. Properties inside Knoxville city limits use City of Knoxville Plans Review & Inspections. Unincorporated Knox County properties use Knox County Codes Administration and Enforcement. Farragut properties use the Town of Farragut permitting system. Check KGIS before applying.

2. Is the Knox County Building Department the same as the City of Knoxville Building Department?

No. They are separate permitting authorities. Both operate from the City-County Building at 400 Main Street, but the City office is in Suite 475 and Knox County Codes Administration is in Suite 547.

3. How do I apply for a City of Knoxville building permit?

Start on the City’s Plans Review & Permits page, create or sign in to the Citizen Access account, choose the correct application, submit the project information and required plans, respond to review comments, pay assessed fees and wait until the permit is issued before starting regulated work.

4. How do I apply for a Knox County building permit?

For an unincorporated Knox County property, use the Knox Permit Portal. Create an account, choose the permit type, enter the property and project information, upload required documents, complete review, pay the assigned fee and confirm issuance before beginning work.

5. What building code does the City of Knoxville use in 2026?

The City’s current code page lists the 2024 IBC, 2024 IRC, 2024 IEBC, 2024 IFC with local amendments, 2024 IPC, IMC and IFGC, 2024 ISPSC with local amendments, 2023 NEC with local amendments, 2018 IECC, 2018 IPMC and 2017 ICC A117.1 accessibility standard.

6. What building code does unincorporated Knox County use?

The current Knox County Code of Ordinances lists the 2018 IBC and 2018 IRC with County amendments and includes other 2018 International Codes for disciplines such as plumbing, mechanical, fuel gas, existing buildings, energy conservation and property maintenance.

7. How much is a building permit in Knoxville or Knox County?

There is no single price. The City generally calculates major building fees from project valuation using its Development Services Fee Schedule. Knox County also uses valuation-based tiers and publishes separate plan-review and other charges. Use the correct jurisdiction’s calculator or fee schedule before budgeting.

8. How do I schedule a building inspection in Knoxville?

For City projects, use the City’s official Inspections service connected to Plans Review & Inspections. For unincorporated County projects, use Knox County’s permit/inspection system. Have the permit number ready and request the inspection required for the current stage before concealing regulated work.

9. Can I search Knoxville building permits by address?

Yes. The City permit/record search supports address, parcel and full record-number searches. For unincorporated County property, use the Knox County permit and inspection resources instead of assuming the City database contains the record.

10. Do I need a permit for a remodel, deck, pool or accessory building?

Many structural alterations, additions, decks, pools and accessory structures can require permits or zoning review, but requirements depend on size, scope and jurisdiction. Check the project category with the responsible City, County or Farragut building office before buying materials or starting work.

Official Resources

Information reviewed for November 2026. USBuilding.org is an independent informational resource and is not affiliated with the City of Knoxville, Knox County or the Town of Farragut. Permit requirements, fees, code amendments, portal procedures and project-specific conditions can change. Use the responsible government office for the final determination on your property or project.

Leave a Comment