Fresno Building Permits, Inspections & City Services
If you searched for the Fresno California Building Department, you are probably trying to do something practical: apply for a permit, check a permit, submit plans, schedule an inspection, understand a fee, or find out whether the City of Fresno is even the correct agency for your property. The office that handles these services inside Fresno city limits is the City of Fresno Planning and Development Department, Building & Safety.
Building & Safety handles building permit processing, plan review and construction inspections. Most online permit work can be handled through Fresno’s Accela Citizen Portal. In-person Building & Safety help is available at Fresno City Hall.
Fresno, CA 93721
First, Make Sure the City of Fresno Is Your Permit Authority
A Fresno mailing address does not automatically mean the City of Fresno issues the building permit. This is one of the easiest mistakes to avoid before paying for plans or opening an application.
| Property location | Likely permit authority | Where to start |
|---|---|---|
| Inside incorporated Fresno city limits | City of Fresno Building & Safety | City Building & Safety |
| Unincorporated Fresno County | County of Fresno Building & Safety | Fresno County Building & Safety |
| Inside the City of Clovis | City of Clovis Building Division | See our Clovis Building Department guide |
Micro-step: If you are not sure, open the City of Fresno GIS Data Hub, locate the property, and confirm the jurisdiction before submitting a permit. If the result is still unclear, call Building & Safety at (559) 621-8084 with the exact street address.
What Fresno Building & Safety Can Help You With
The department is more than a permit counter. For a typical homeowner, contractor or business owner, these are the services that matter most:
- Submitting building permit applications and construction plans.
- Plan review for building-code compliance.
- Checking application status, comments and due dates online.
- Submitting plan-check corrections, backchecks and addendums.
- Paying permit invoices.
- Scheduling construction inspections.
- General permit and construction questions.
- Same-day express permit assistance for certain electrical, mechanical and plumbing permits.
- General zoning inquiries and Zone Clearance submittals.
- ADA and disabled-access information.
- Application submittal assistance.
- Public document review.
Do You Need a Fresno Building Permit?
The City’s Building Permit Center explains that a permit is required before regulated work such as constructing, altering, repairing, moving or demolishing a building, changing occupancy, or installing or altering regulated electrical, gas, mechanical or plumbing systems.
| Project | What to expect |
|---|---|
| New house or commercial building | Building permit, plans, plan review and project-specific Planning, Fire, Public Works or utility review may apply. |
| Room addition | Normally requires plans and a building permit. Structural, energy, electrical, plumbing and mechanical review can apply. |
| Residential remodel | Permit requirements depend on the work. Structural changes and regulated trade work normally trigger permits. |
| Commercial tenant improvement | Expect building review and possible accessibility, occupancy, Fire and trade review depending on the scope. |
| Reroof | Fresno publishes specific reroof applications and fee lines. Confirm the correct residential, multifamily or commercial process. |
| Patio, carport or accessory structure | The City publishes project-specific forms and details for several of these projects. Zoning setbacks can matter before permit review. |
| Pool or spa | Building review, electrical work, safety-barrier requirements and inspections can apply. |
| Solar or battery installation | Eligible residential rooftop solar may use SolarAPP+. Commercial solar uses the City’s standard permit process. |
| Demolition | A demolition permit and project-specific clearances can apply before work starts. |
| Change of use or occupancy | Do not treat this as a simple remodel. Building, Planning, Fire, accessibility and occupancy requirements can change. |
Do not rely on a general internet list of “permit-exempt” projects for a final decision. Size, location, zoning, utilities, structural conditions and the exact scope can change the answer. For a small project that appears exempt, give the City the property address and a one-sentence description of the work before construction begins.
How to Apply for a Fresno Building Permit Online
Fresno uses its Accela Citizen Portal for online permit activity. The City says the system can be used to create, submit and search applications, review comments and due dates, submit backchecks and addendums, schedule inspections, view invoices and pay fees.
-
Confirm the property is inside Fresno city jurisdiction.
Do this before preparing a City application. A property in unincorporated Fresno County or Clovis uses a different permit authority. -
Define the full scope of work.
List everything being built, altered or removed. Include electrical, plumbing, mechanical, grading, demolition, solar or other related work rather than describing only the main construction item. -
Check whether Planning approval is needed first.
Projects involving a new non-single-family structure, use change, zoning clearance, signage, an ADU or other land-use issue may require Planning review before or alongside building review. -
Prepare the application information and plans.
Have the project address, owner information, applicant contact, contractor information, project valuation, square footage, construction type and relevant drawings ready. -
Open the official Fresno Citizen Portal.
Go to Fresno Accela Citizen Portal. Register for an account if the transaction requires one, or sign in to your existing account. -
Select the correct application and enter the project details.
Use the permit type that matches the actual work. Upload the complete set of required plans and supporting documents. -
Watch the record for review comments.
The portal can display application status, comments and due dates. If corrections are requested, answer every item and submit coordinated revised documents. -
Pay the invoice after the applicable review.
Accela provides access to invoices and online fee payment. The amount can include more than the basic building fee. -
Confirm the permit is actually issued.
A submitted application or paid invoice is not automatically permission to begin regulated construction. Check the record for issuance.
What to Prepare Before Opening the Permit Portal
Fresno’s Building Permit Application form updated in February 2026 gives a useful picture of the information the City expects. Preparing these details first can prevent an incomplete start.
The application also identifies possible review areas such as Building, Planning, Public Utilities/Public Works, Fire, structural, plumbing, mechanical, electrical, grading and Title 24. Residential solar applications ask for additional system information, including panel count, DC kW, battery or service-panel changes and roof/system configuration.
View the official 2026 Fresno Building Permit Application PDF.
Fresno Building Permit Fees in 2026
There is no single Fresno building permit price. The amount depends on the project type, size, construction, plan review, inspections, trade work and any applicable Planning, Fire, impact or other charges.
The City’s Master Fee Schedule effective July 1, 2026 provides useful current examples:
| Fee item | 2026 City fee shown in schedule |
|---|---|
| Certificate of Occupancy, multifamily/commercial | $67.65 |
| Incorrect address/location resulting in a trip | $67.65 |
| Premature inspection when work is not ready | $67.65 per trip |
| Reinspection other than entitled inspection calls | $100.21 per trip |
| Building permit renewal after expiration | 25% standard fee; $67.65 minimum |
| Technology / entitlement-processing-system surcharge | $23.79 on building permits |
| Deck/patio, non-engineered | $238.02 plan check + $266.83 inspection |
| Residential demolition | $102.72 plan check + $192.92 inspection |
| Residential remodel, first 500 sq. ft. | $227.99 plan check + $489.83 inspection |
| Residential PV, first 15 kW | $170.37 plan check + $162.85 inspection |
| Composition reroof with no tear-off | $102.72 plan check + $58.87 inspection |
| Residential swimming pool/spa | $102.72 plan check + $385.85 inspection |
The City’s fee schedule also states that working without a required permit may result in a charge of up to four times the permit fee. Starting with the permit question is usually far cheaper than trying to correct an unpermitted project afterward.
Open the official City of Fresno 2026 Master Fee Schedule.
When Planning or Zoning Comes Before the Building Permit
A common delay happens when the construction drawings are prepared before the land-use question is settled. Building code approval and zoning approval solve different problems.
| Situation | Planning issue to check |
|---|---|
| New single-family custom home | The City directs applicants through Zone Clearance before the Building submittal. Fresno notes that review can take up to 14 business days from acceptance. |
| ADU / backyard cottage | Zone Clearance and the City’s current ADU requirements should be checked before relying on a building-only plan. |
| New structure other than a single-family residence | Fresno states that Development Permit applications are required for new structures other than single-family residences. |
| Commercial sign | Sign review should be completed as required before the related building permit. |
| Change of use | Confirm the proposed use is allowed and whether a Development Permit, Conditional Use Permit, accessibility upgrade or other review applies. |
Practical sequence: check zoning → confirm the proposed use and setbacks → complete required Planning clearance → prepare coordinated construction plans → submit the building permit. That sequence is usually safer than designing first and discovering a zoning conflict later.
For Planning questions, use the official Fresno Applications, Forms & Fees page or call Planning and Development at (559) 621-8277.
How Fresno Building Inspections Work
Once the required permit is issued, Fresno Inspection Services performs field inspections during construction. The City assigns inspectors by area and provides online inspection scheduling through its permit system. It also identifies its automated voice-response service, “Voice Permits,” for inspection scheduling and status functions.
How to request an inspection
-
Confirm the permit is active and issued.
Keep the permit number available. -
Check which inspection is actually required next.
Use the approved plans, permit record and inspection list rather than guessing the inspection type. -
Open the City permit record.
Sign in to the Fresno Citizen Portal and locate the permit. -
Use the inspection-scheduling option.
Select the applicable available inspection and submit the request. -
Make the job site inspection-ready.
Required work should be complete, visible and safely accessible. Keep approved plans and relevant permit information available. -
Check the inspection result before covering work.
If corrections are issued, complete them and arrange the required follow-up inspection.
Typical inspection stages
The exact sequence is set by the permit, but a project may involve stages such as:
- footing or foundation;
- underground plumbing, electrical or other concealed work;
- rough framing and rough trade inspections;
- insulation or energy-related inspection;
- drywall, lath or other project-specific inspection;
- equipment or system inspection;
- final inspection and, when applicable, occupancy approval.
Check Permit Status, Corrections, Fees or Older Records
For an active electronic application, start with Accela. The City says the portal supports application searches, status, reviewer comments, due dates, addendums, invoices, fee payments and inspections.
- Open the Fresno Citizen Portal.
- Sign in if you are working with your own application.
- Search for the permit/application using the supported record information.
- Open the matching record.
- Review the current status, comments, due dates, invoices and available inspection information.
- If the record is old or is not available online, contact Building & Safety or request public document review at City Hall, Room 3043.
If you are researching an older property rather than managing a live project, bring as much identifying information as possible: the exact address, assessor parcel number if known, old permit number, approximate construction year and the type of work you are trying to verify.
Fresno Permit Expiration: The 180-Day Rule
This detail matters if construction has stalled. Fresno’s Building Permit Center states that a permit becomes invalid when work does not start within 180 days after issuance, or when permitted work is suspended or abandoned for 180 days after it begins.
- An approved inspection demonstrates continuing work and moves the expiration date to 180 days from that approved inspection.
- The Building Official may grant an extension of up to 180 days when a written request showing justifiable cause is received before expiration.
- If a permit has had no activity for one year or more, the City says it becomes null and void and new permits are required at full fees.
- An expired permit may be eligible for renewal at 25% of the permit fee, subject to the City’s rules and a current minimum renewal fee of $67.65.
- If codes, laws or ordinances changed after expiration, new permits and full fees may be required.
If your Fresno project has been inactive for several months, check the record before restarting work. Do not assume that a paper permit in your files is still active.
What Building Code Applies in Fresno in 2026?
For the 2026 code cycle, Fresno is operating under the 2025 California Building Standards Code, which became effective statewide on January 1, 2026. Fresno’s adopted regulations cover the applicable California Building, Residential, Electrical, Mechanical, Plumbing, Energy and Green Building Standards Codes, together with legally adopted local provisions.
That means a document calling itself the “2025 code” can still be the correct current code for a project submitted in 2026. The edition year and effective year are not the same thing.
For a plain-language overview of the statewide code family, see our California Building Code 2026 guide. For a real project, use the City of Fresno’s adopted requirements and current review comments as the final local authority.
Residential Solar: Fresno’s SolarAPP+ Option
Fresno offers SolarAPP+ for eligible single-family and duplex rooftop solar projects. The system is designed for qualifying projects submitted by registered licensed contractors and can provide an automated compliance review before the City permit step.
-
Complete the project in SolarAPP+.
The registered contractor enters the eligible residential solar project into the NREL SolarAPP+ system. -
Obtain the SolarAPP+ confirmation.
The automated system reviews the project against applicable criteria. -
Continue to Fresno’s Accela system.
Upload the SolarAPP+ confirmation and complete the City’s online application process.
Commercial solar does not qualify for this SolarAPP+ route. Fresno directs commercial solar projects to its standard Accela permit process.
Read Fresno’s official SolarAPP+ instructions.
Common Fresno Permit Problems and the Fastest Practical Fix
| Problem | What to do |
|---|---|
| You submitted to the wrong agency | Verify City of Fresno vs. Fresno County vs. Clovis jurisdiction before resubmitting. |
| Review is waiting on corrections | Open the Accela record, read every comment, revise all affected sheets and submit a coordinated correction package. |
| You cannot tell what fee you will pay | Use the Master Fee Schedule only as a guide. The City’s permit invoice is project-specific and controls the amount due. |
| The permit has been inactive | Check the date of the last approved inspection and permit status before restarting work. |
| Inspection failed | Read the correction, fix the cited item, keep the corrected work visible and request the appropriate reinspection. |
| Old permit is not found online | Contact Building & Safety and ask about public document review using the address and any known permit/APN information. |
| You planned construction before checking zoning | Confirm use, setbacks, Zone Clearance and other Planning requirements before paying to redesign the project. |
Official Fresno Links You Are Most Likely to Need
- City of Fresno Building & Safety — permits, inspections, forms and department information.
- Fresno Citizen Portal — applications, status, corrections, invoices, payments and inspections.
- Building Permit Center — permit process and expiration guidance.
- Building Services & Reports — inspections, forms and building activity reports.
- Planning Applications, Forms & Fees — zoning and development applications.
- City GIS Data Hub — mapping and property-related geographic information.
- City Master Fee Schedule access — current City fee documents.
Fresno California Building Department FAQs
1. Where is the Fresno Building Department located?
City of Fresno Building & Safety services are provided through the Planning and Development Department at Fresno City Hall, 2600 Fresno Street, Room 3043, Fresno, CA 93721.
2. What is the Fresno building permit phone number?
For City of Fresno building-permit questions, call (559) 621-8084. Inspection Services can be reached at (559) 621-8116.
3. Can I apply for a Fresno building permit online?
Yes. Fresno uses its Accela Citizen Portal for online permit applications and related services. The City says users can submit and search applications, see status and comments, submit corrections, access invoices, pay fees and schedule inspections.
4. How do I know whether the City of Fresno or Fresno County issues my permit?
Use the property’s actual jurisdiction, not just the mailing address. Property inside incorporated Fresno generally uses City Building & Safety. Unincorporated property generally uses Fresno County Building & Safety. Confirm through official mapping or the responsible agency before filing.
5. How much is a Fresno building permit in 2026?
There is no single flat price. Fees vary by project type, size, review, inspections, trades and other applicable charges. The City Master Fee Schedule effective July 1, 2026 includes individual plan-check, inspection and surcharge amounts, while the project invoice provides the final amount due.
6. How do I schedule a Fresno building inspection?
Use the inspection function associated with the issued permit in Fresno’s Citizen Portal, or follow the City’s current inspection instructions. Have the permit number and correct inspection type ready, and make sure the work is complete and accessible before requesting inspection.
7. When does a Fresno building permit expire?
Fresno states that a permit becomes invalid if authorized work does not start within 180 days of issuance or if work is suspended or abandoned for 180 days. An approved inspection generally resets the active period for another 180 days.
8. What building code does Fresno use in 2026?
The 2025 California Building Standards Code became effective January 1, 2026. Fresno applies the applicable state Building, Residential, Electrical, Mechanical, Plumbing, Energy and Green Building Standards Codes together with valid local amendments.
9. Can Fresno issue same-day building permits?
Not every permit qualifies. The City lists same-day express in-person service for certain electrical, mechanical and plumbing permits. Projects requiring plans, zoning review or multi-agency review take a different path.
10. Where can I find an old Fresno building permit?
Start by searching the City permit system. If an older record is not available electronically, contact Building & Safety or request public document review at City Hall. Provide the exact property address and any known parcel or permit information.
Before You Submit: A 60-Second Fresno Permit Checklist
- Confirm the property is actually inside the City of Fresno.
- Write a complete description of the work, including related trades.
- Check zoning or Zone Clearance requirements before finalizing plans.
- Prepare owner, applicant and contractor information.
- Prepare the correct drawings, calculations and supporting documents.
- Use the current Fresno Citizen Portal, not an old third-party permit link.
- Read every plan-review correction before resubmitting.
- Do not start regulated work until the required permit is issued.
- Schedule inspections before required work is concealed.
- Keep the permit active by monitoring inspection and expiration dates.
For most users, the final action is simple: once you know the correct jurisdiction, permit type, documents, likely fees and inspection process, go to the official Fresno Citizen Portal to complete the live application, payment, permit-status or inspection step.
Information reflects City of Fresno resources and the 2026 California code and fee cycle available at the time of review. USBuilding.org is an independent informational resource and is not affiliated with the City of Fresno. Project-specific requirements, fees, forms and procedures can change, and the responsible government agency makes the final determination.