Franklin Park Building Permits, Inspections & Local Services
If you are planning construction, remodeling, roofing, a fence, deck, garage, electrical work, plumbing, HVAC replacement or commercial improvements in Franklin Park, Illinois, the Village Building Department is usually the place to start.
9500 Belmont Avenue
Franklin Park, IL 60131
Franklin Park Citizen Access Portal
Monday-Friday
8:00 a.m.-4:30 p.m.
This guide covers the Village of Franklin Park in Cook County, Illinois. A Cook County mailing address does not necessarily mean Cook County issues the permit.
Do You Need a Franklin Park Building Permit?
The Village says permits are required for nearly all interior and exterior residential, commercial and industrial construction. Do not assume a small project is automatically exempt simply because no structural wall is being changed.
| Project | Permit position | What to check first |
|---|---|---|
| New building or addition | Permit and plan review normally required | Building plans, zoning, site conditions and contractor licensing |
| Kitchen or bathroom remodel | Usually requires permits when regulated construction or trades are involved | Building, electrical, plumbing and HVAC scope |
| Roofing, siding or masonry | Village lists these as permit-regulated work | Contractor information and project cost |
| Deck, garage or structural alteration | Permit and plan review typically required | Plans, plat/survey where requested, setbacks and zoning |
| Fence | Permit-regulated work | Property lines, easements and zoning rules |
| Electrical work | Electrical permit may be required | Licensed contractor and electrical scope |
| Plumbing or sewer work | Permit-regulated work | Licensed plumbing contractor requirements |
| Furnace, air conditioner or other HVAC | Permit-regulated work | Equipment and mechanical scope |
| Sign | New and replacement signage requires Village approval | Sign permit and zoning/location rules |
| Pool or spa | Permit required | Site layout, safety provisions and applicable code |
| Demolition | Special permit process applies | Village requirements, Cook County demolition approval and bond requirements |
The Village’s April 2025 resident reminder also specifically identifies projects such as decks, stairs, garages, fences, sheds, pools, hot tubs, patios, pergolas, gazebos, driveways, basement renovations, reroofing, water heaters, boilers, electrical repairs, plumbing repairs and natural-gas expansion as work for which residents should check permit requirements.
If your project is unusual, call 847-671-8245 before purchasing materials or starting work. That short call can prevent a stop-work order or a doubled permit charge later.
How to Apply for a Franklin Park Building Permit
Franklin Park now provides a 24/7 online Citizen Access system for many permit and inspection services. Paper forms and in-person assistance remain available.
Step 1: Define exactly what work will be done
Write a simple scope covering every part of the project: structural work, roofing, electrical, plumbing, HVAC, concrete, fencing, signs or fire-related work. One project can involve several reviews.
Step 2: Check zoning before designing an exterior project
For an addition, garage, fence, new structure or other work affected by property location, confirm the zoning district and applicable setback or land-use requirements. The Village provides an official Zoning Department page and interactive zoning map.
Step 3: Open the official online permit portal
Go to the Franklin Park Citizen Access Portal. The system supports online government services 24 hours a day.
Create an account when you need full online services. The portal also provides limited public searching without an account.
Step 4: Select the correct record type
The Village currently lists online services for contractor registration and permits including Building, Electrical, Sign, Fire, Dumpster, POD, Small Wireless, Home Business and Vacant Building Registration.
Step 5: Complete the project information carefully
The Village building permit form asks for items such as the property address, property owner’s information, description of work, job cost, flood-zone information, construction/use details, floor area and contractor information.
Step 6: Upload or submit plans and supporting documents
New buildings require plan review. The Village also says additions, remodeling, structural modifications, garages and decks are commonly reviewed. Submit drawings when the application requires them rather than waiting for the reviewer to request missing documents.
Step 7: Wait for approval before starting regulated work
Village staff reviews the application for building-code, zoning, engineering and other applicable requirements. If corrections are requested, revise the submission before proceeding.
Step 8: Pay the assessed permit charges and obtain the permit
The final fee depends on the project. Once the permit is issued, display it prominently at the job site and keep approved plans available during construction.
What Should You Prepare Before Applying?
The exact package depends on the job, but preparing the following items in advance can reduce back-and-forth during review:
- Exact Franklin Park property address.
- Owner name, telephone number, mailing address and email.
- Clear description of all proposed work.
- Total estimated project cost, including relevant labor and materials.
- Plans, sketches or construction drawings when applicable.
- Plat of survey or site information when required for exterior improvements.
- Structural or engineering information when requested.
- Contractor and subcontractor names and contact details.
- Applicable Village contractor licenses and bonds.
- Project contract or proposal when requested.
- Electrical permit application when electrical work is part of the project.
- Information about plumbing, mechanical, fire or engineering work where applicable.
The Village application specifically notes that second-floor additions on an existing slab or crawl-space construction require engineering specifications for the foundations/footings.
Special warning for demolition
The Franklin Park building permit application states that when demolition work is proposed, a Cook County demolition permit must first be obtained. The Village application also identifies a $50,000 demolition bond requirement.
If your project is instead located in an unincorporated part of Cook County, use our Cook County Building Department guide because the county process is different from Franklin Park’s municipal permit process.
Franklin Park Building Permit Fees
There is no single flat price for every Franklin Park permit. The Village’s currently published Department of Inspectional Services fee sheet calculates many charges according to the project type and construction cost.
| Published fee item | Amount shown by Village fee schedule |
|---|---|
| Single- and two-family building permit processing | $50 processing |
| 3-unit and larger multifamily building processing | $75 processing |
| Commercial / industrial building processing | $100 processing |
| General building permit calculation | 1.5% of total construction cost |
| Single A/C replacement | $50 per unit |
| Single furnace replacement | $50 per unit |
| Swimming pool permit | $50 |
| Additional inspection after the included initial and reinspection | $50 per additional reinspection |
| Work started without required permit | 2× standard permit fee |
The fee sheet also states that private contractors can be required to post a construction-waste deposit between $100 and $500, as determined by the Department, with the deposit returnable after proper disposal is demonstrated.
Outside plan-review charges, engineering work, utility connections, specialized permits and project-specific inspections can add to the total. Do not calculate a check from this table alone. Use the amount assessed by the Village for your actual project.
View the official Franklin Park Inspectional Services fee schedule (PDF).
How Franklin Park Building Inspections Work
Getting the permit is not the end of the process. Construction must be inspected at the required stages shown for the approved project.
- Read the issued permit. Identify each inspection required for your project.
- Keep the permit number ready. The Village building application specifically tells applicants to have the permit number available when scheduling.
- Request the inspection before covering the work. The Village normally requires 24 hours’ advance notice.
- Make the site accessible. The inspector must be able to see the work being inspected.
- Keep approved plans at the site. Construction should match the approved documents.
- Correct failed items. If work does not conform, complete the required corrections.
- Request the next inspection or reinspection. Do not continue past a required inspection point until authorized.
- Complete the final inspection. A project is not effectively closed merely because the physical work appears finished.
You can start from the Village’s official inspections page or use the online permitting portal for supported inspection services.
Contractor Licensing Requirements
Franklin Park requires contractors performing work in the Village to be properly licensed, insured and bonded.
| Requirement | Current Village guidance |
|---|---|
| Standard contractor license | $100 for a one-year license running May 1 through April 30 |
| General contractor annual license | $250 |
| Standard bond | $10,000 license and permit bond for applicable contractors |
| Demolition contractor bond | $50,000 |
| Liability insurance | Minimum $1,000,000 coverage |
The Village also publishes trade-specific requirements:
- Roofing contractors: submit a copy of the Illinois roofing license.
- Sewer and drain contractors: provide the applicable city license.
- Electrical contractors: provide registration from Chicago or another qualifying municipality accepted by Franklin Park.
- Plumbing contractors: provide the required Illinois Department of Public Health bond or state license documentation.
State-licensed plumbing contractors are listed by the Village as having no Franklin Park license fee under the applicable state requirement; other plumbing contractors may need a Village license.
Use the official Franklin Park contractor page before registering because credentials and annual licensing requirements can change.
Franklin Park Building Codes Used in 2026
The Village’s main Building Department page identifies an ordinance adopted in September 2025 and lists the following code framework for current work.
| Subject | Adopted code listed by Village |
|---|---|
| Building | 2021 International Building Code |
| Residential | 2021 International Residential Code |
| Property maintenance | 2021 International Property Maintenance Code |
| Mechanical | 2021 International Mechanical Code |
| Electrical | 2020 National Electrical Code |
| Plumbing | 2014 State of Illinois Plumbing Code |
| Fire prevention | 2021 International Fire Code |
| Energy | 2021 International Energy Conservation Code |
| Fuel gas | 2021 International Fuel Gas Code |
| Accessibility | 2018 Illinois Accessibility Code and ICC/ANSI A117.1 |
| Pool and spa | 2021 International Swimming Pool and Spa Code |
Local Franklin Park amendments also apply. For a design decision, use the current ordinance rather than relying only on a standard model-code book.
Zoning Checks Before You Submit a Permit
A building permit and zoning approval solve different problems. A structure may meet construction-code standards but still be too close to a property line, exceed a dimensional rule, or involve a use that requires zoning relief.
Franklin Park’s Zoning Administrator administers Title 9 of the Village Code. The Village also provides an interactive zoning map for checking a property’s zoning classification.
Micro-step: check your zoning first
- Open the Franklin Park Zoning page.
- Select the Village’s interactive zoning map.
- Search the property address.
- Note the zoning classification.
- Review the applicable zoning rules before finalizing plans.
- If you need a variance, conditional use, subdivision or amendment, contact Community Development and Zoning at 847-671-8227 before filing final plans.
The Village publishes a 2026 Zoning Board of Appeals schedule with application deadlines. Zoning relief takes additional time, so identify that issue before treating a construction permit date as your project start date.
Other Franklin Park Building Department Services
Pre-sale property inspections
Franklin Park requires residential, commercial, industrial properties and vacant lots to apply for a pre-sale inspection at the time a property is listed.
The Village publishes several local requirements that sellers and buyers should not leave until closing week:
- No “For Sale” sign before completion of the pre-sale inspection application.
- An original plat of survey not older than six months is required three days before closing.
- The original deed must be submitted at least three days before closing.
- The purchaser’s New Owner Form is due at least three days before closing.
- If the purchaser assumes repair responsibility, the notarized affidavit is due at least three days before closing.
- Final water-meter readings should be scheduled five days before they are needed.
- The buyer is typically given 30 days after closing to correct assumed violations.
Start with the official pre-sale inspection page before setting the final closing timeline.
Rental and multi-family inspections
Multi-family dwellings with three or more units must be registered and inspected annually. The Village currently lists the registration period as May 1 through April 30 and a fee of $25 per unit.
For a single-family rental home, Franklin Park requires a rental inspection before a new tenant occupies the residence. The Village’s current rental page states that there is no fee for that single-family rental inspection service at this time.
Commercial occupancy and business changes
Before a commercial property is occupied, the new owner or tenant must obtain the required occupancy approval. The rule also applies when an existing business changes ownership or business name.
Do not sign a lease assuming an existing occupancy approval automatically transfers to a new business. Confirm the proposed use, zoning and occupancy requirements before opening.
Signs and elevators
Franklin Park states that signs and elevators are inspected annually, and new or replacement signage requires a permit.
Building and property-maintenance complaints
If you believe work is being performed without a permit, provide the exact property address and the nature of the concern to the Building Department at 847-671-8245 or inspections@vofp.com.
The department also handles property-maintenance concerns involving issues such as excessive weeds, accumulated garbage, stagnant water, abandoned vehicles and other exterior maintenance conditions.
Make Sure Franklin Park Is Actually Your Permit Authority
Franklin Park is an incorporated municipality in Cook County and operates its own building-permit system. Do not automatically submit a Cook County application simply because the property is in Cook County.
Use the project property’s actual municipal jurisdiction:
- Inside the Village of Franklin Park → use the Franklin Park Building Department.
- Unincorporated Cook County → see the Cook County building permit process.
- Property in Cicero → follow the separate Cicero Building Department guide.
- Property in Berwyn → use the Berwyn permit and inspection process.
Municipal boundaries matter because permit forms, fees, contractor registrations and inspection scheduling are not interchangeable.
Franklin Park Building Department FAQs
1. Where is the Franklin Park Building Department?
The Building Department is located at 9500 Belmont Avenue, Franklin Park, Illinois 60131. It operates from the Village Hall building.
2. What is the Franklin Park Building Department phone number?
Call 847-671-8245 for building-permit questions and general Building Department assistance. Permit questions can also be emailed to inspections@vofp.com.
3. Can I apply for a Franklin Park building permit online?
Yes. Franklin Park operates an Accela Citizen Access portal. The Village currently lists online applications for Building, Electrical, Sign, Fire, Dumpster, POD, Small Wireless, Home Business and Vacant Building Registration services, along with contractor registration and supported inspection services.
4. Do I need a building permit to remodel my Franklin Park home?
Often, yes. The Village requires permits for nearly all regulated interior and exterior construction, including remodeling involving carpentry, electrical, plumbing, HVAC and other building work. Contact the department before starting if the scope is uncertain.
5. How much does a Franklin Park building permit cost?
The Village’s published fee schedule lists building-permit processing charges of $50 for single- and two-family projects, $75 for larger multifamily projects and $100 for commercial/industrial work, with a building permit charge commonly calculated at 1.5% of total construction cost. Other project-specific fees can apply.
6. How far in advance should I schedule an inspection?
The Village’s permit process states that inspections normally require 24 hours’ advance notice. Have the permit number, job address and requested inspection type ready.
7. What happens if I start construction without a Franklin Park permit?
The currently published Village fee schedule states that work started before issuance of a required permit is subject to a permit fee equal to two times the standard permit fee. Enforcement or correction requirements may also affect the project.
8. Does my contractor need a Franklin Park license?
Yes. Franklin Park requires contractors performing work in the Village to meet local licensing, insurance and bonding requirements. General contractors, roofers, electricians, plumbers and other trades may also have trade-specific documentation requirements.
9. Is a pre-sale inspection required when selling property in Franklin Park?
Yes. The Village requires residential, commercial, industrial properties and vacant lots to apply for a pre-sale inspection when the property is listed. Closing-related documents and correction procedures also apply.
10. Who handles zoning questions in Franklin Park?
The Village’s Community Development and Zoning Department handles zoning administration. Its main line is 847-671-8227. Use the official zoning map and contact staff before applying for a variance, conditional use, subdivision or other zoning relief.
Before You Start Work
For most Franklin Park projects, the easiest way to avoid delays is to settle the basic questions before construction begins: confirm that the property is inside Franklin Park, check zoning for exterior work, identify every trade involved, verify the contractor’s Village credentials, and submit complete plans with the permit application.
Once approved, keep the permit visible, follow the approved plans and request each inspection before the work is covered. For the final application, current fee confirmation or project-specific ruling, use the official Village of Franklin Park Building Department.
Information reviewed: November 3, 2026. Permit fees, forms, staff, adopted codes and online processes can change. Village records and the requirements applied to the individual property control.