Greensboro Building Department 2026: Permits, Inspections & Services

Greensboro Building Permits, Inspections & Development Services

Quick answer: Building permits and construction inspections inside the City of Greensboro, North Carolina are handled through the City’s Development Services / Engineering & Inspections operation. The main permit office is at 300 W. Washington St., Greensboro, NC, and the published building-permit help number is 336-373-2155.

For projects needing plan review, Greensboro uses its online Plan Review & Tracking system. Inspections can be requested online or through the City’s APRIL phone system at 336-373-2400.

Permit office 300 W. Washington St.
Greensboro, NC
Permit help 336-373-2155
Monday-Friday, 8 a.m.-5 p.m.
Inspection requests APRIL: 336-373-2400
Online scheduling also available

First Check: City of Greensboro or Guilford County?

This is the step that can save the most time. A Greensboro mailing address does not automatically prove that the property is inside Greensboro’s municipal permitting jurisdiction.

The City of Greensboro handles building permits within its jurisdiction. Guilford County separately provides permitting and inspection services for unincorporated Guilford County and several contracted municipalities, including Jamestown, Oak Ridge, Pleasant Garden, Sedalia, Stokesdale, Summerfield and Whitsett.

Practical check: If you are uncertain, verify the property’s jurisdiction before preparing plans or paying fees. Guilford County’s official jurisdiction page specifically lists the City of Greensboro as a separate permitting jurisdiction.

Check Guilford County jurisdiction information →

When Do You Need a Building Permit in Greensboro?

Greensboro’s residential guidance says a building permit is required for structural construction and generally for construction, installation, repair, replacement or alteration costing more than $40,000.

The $40,000 figure is not a blanket exemption. Work at or below that amount can still require a permit.

Project or change What Greensboro’s guidance indicates
New house or building Permit and plan review required.
Room addition Permit required; site-plan review may also apply because new ground is covered.
Deck, porch or detached accessory building Often requires a permit and site-plan review depending on the project.
Load-bearing structural work Permit required even when total project cost is $40,000 or less.
New or redesigned plumbing A plumbing permit may be required.
HVAC replacement or design change Mechanical permitting commonly applies.
Electrical wiring, equipment or service changes Electrical permitting may apply; simple like-kind device or light-fixture replacement is treated differently.
Demolition Use the City’s demolition permit procedure before regulated demolition begins.
Commercial change of use Plan review is required; examples include changing a warehouse to a church or a store to a restaurant.

Greensboro specifically lists replacement of residential windows, doors and exterior siding, and replacement of pickets, railings, stair treads and decking on porches or exterior decks among work that can fall outside the building-permit requirement when the City’s stated exemption conditions are met. That does not automatically remove zoning, historic-district, electrical, plumbing, mechanical or other approvals.

Do not start first and ask later. Greensboro’s published building-fee schedule states that building permit fees are doubled when work begins before the required permit is secured.

How to Apply for a Greensboro Building Permit

The application path depends on the project. Greensboro moved plan-based submissions to its electronic Plan Review & Tracking system. Interior-only residential alterations can follow a different counter process.

Step 1: Confirm the property is under City jurisdiction

Verify that the property is actually within Greensboro’s permitting authority rather than unincorporated Guilford County or another municipality.

Step 2: Identify the permits and reviews your project needs

A project may involve building, electrical, mechanical, plumbing, fire, zoning, site-plan, erosion-control, stormwater, driveway or utility approvals. Commercial projects may involve several departments before occupancy can be approved.

Step 3: Download the correct application and requirements

Open the City’s Permits, Fees and Procedures page. It provides residential, residential accessory-building, commercial and demolition applications along with current submittal requirements and fee schedules.

Step 4: Prepare the site plan and construction documents

For new residences, additions outside the existing footprint and detached accessory structures, residential site-plan review is required. Plans should be drawn to scale and provide enough detail for reviewers to understand the proposed work.

Step 5: Create a Plan Review & Tracking account

Open Plan Review & Tracking, create or sign in to an account, start a new request, enter the project information and upload the required PDF documents.

Step 6: Follow reviewer comments

The electronic system lets applicants monitor the review, communicate with City staff, receive comments, submit revisions, pay applicable charges and download approved documents.

Step 7: Pay fees and obtain the issued permit

Do not treat submission as approval. Wait until the required reviews are complete and the City has actually issued the permit before beginning regulated construction.

Step 8: Schedule inspections as work progresses

Keep required work visible until the applicable inspection is approved. Use the City’s inspection scheduler or APRIL system as the project reaches each inspection point.

Documents to Prepare Before You Submit

Incomplete plans create avoidable back-and-forth. Greensboro’s residential plan-submittal guidance identifies more detailed drawings for new homes, habitable additions, major structural alterations, converted attics or garages, sunrooms and other projects involving new or altered occupied space.

Information Why it matters
Project address and owner information Connects the application to the correct property and jurisdiction.
Clear description of work Helps reviewers determine which permits and codes apply.
Scaled site plan when required Used for setbacks, new footprint, accessory structures, decks and similar site-related review.
Foundation and framing information Needed for structural review on applicable new construction and additions.
Floor plans Show walls, rooms, plumbing fixtures, stairs and other construction details.
Project construction cost Used in the City’s building-permit fee calculation.
Contractor information Required where licensed contractors are responsible for regulated work.
Historic, floodplain or special-site information Can trigger additional review before building approval.

Greensboro Building Permit Fees in 2026

Greensboro does not charge one flat amount for every project. Building fees are generally tied to construction value, while electrical, plumbing and mechanical permits have separate schedules.

The City’s currently posted fee materials show an $85 minimum permit fee for building, electrical, mechanical and plumbing permits.

Published fee item Amount / calculation
Minimum building permit fee $85
Demolition permit $85
Tent permit $85
Residential permit with state-licensed contractor Published schedule adds $10
New construction / commercial addition / initial upfit from $100,000 to $500,000 $427 + $3.25 per $1,000 above $100,000
Same category above $500,000 $1,727 + $1.15 per $1,000 above $500,000
Residential addition / commercial alteration or repair from $100,000 to $500,000 $302 + $2 per $1,000 above $100,000
Same category above $500,000 $1,102 + $1.15 per $1,000 above $500,000
Work started without required building permit Building permit fee is doubled under the posted schedule

For building permits, the City bases its calculation on general construction cost, which excludes plumbing, mechanical and electrical costs. Those trade permits are charged separately.

Examples from the separate trade schedules include an $85 minimum, a $99 listed fee for a 200-amp electrical service, and plumbing fixture charges that can be combined subject to the minimum permit fee.

Open the official Greensboro building permit fee schedule →

Use the published figures for budgeting only. The actual amount can change with project valuation, trade work, fire review, planning approvals and other project-specific requirements.

How Long Does Greensboro Plan Review Take?

The City’s published review times differ for residential and commercial projects.

Review type Published guidance
Residential plan review About five or more business days, depending partly on Planning approval when a site plan is required.
Residential application with no site-plan requirement The City’s residential review page states that a permit may be issued immediately when no site plan is required.
Standard commercial plan review Approximately 14-21 business days, depending on applicable Planning/site-plan approval.

Those are published review targets, not guaranteed completion dates. A missing site plan, incomplete drawings, reviewer correction, change of use, fire review, zoning issue or revised design can extend the process.

How to check your plan-review status

  1. Open the City’s Plan Review Status portal.
  2. Search using the project address, applicant name or Plan ID.
  3. Open the matching project.
  4. Review the current status and available review information.
  5. If you are the applicant, use Plan Review & Tracking for reviewer communication and revisions.

How to Schedule a Greensboro Building Inspection

Greensboro provides both online inspection tools and the APRIL automated telephone system.

Option 1: APRIL phone scheduling

Call 336-373-2400. Greensboro states that inspection requests through APRIL must be made by 8 p.m. on the previous business day for the requested inspection date.

Have the permit number ready. Contractors also need their PIN. APRIL can request, cancel or reschedule inspections and provide inspection or plan-review information.

APRIL building inspection code Inspection
100Footing
105Slab
110Foundation or waterproofing
120Rough or insulation
130Exterior rough
140Landscaping
199Building final

Option 2: Online inspection system

  1. Open the Greensboro Building Inspections Scheduler.
  2. Sign in when scheduling access is required.
  3. Enter the permit information.
  4. Select the correct inspection type.
  5. Submit the request and verify that it appears in the system.
Jobsite tip: Do not cover framing, wiring, plumbing, insulation, foundation work or other construction that still needs to be inspected. Keep the permit card and approved information available so the inspector and contractor can verify the project’s inspection status.

Search a Greensboro Permit or Inspection Record

You may not need to call the office simply to find basic permit information. Greensboro’s inspection system supports permit and inspection lookups by permit number or address.

  1. Open the official GSO Building Inspections system.
  2. Use the permit/inspection lookup option.
  3. If available, enter the exact permit number for the fastest match.
  4. If you do not know the number, search using the job-site street address.
  5. Open the matching record and review permit status, issued information and available inspection details.

For plan-review status rather than an already-issued permit, use the City’s separate Plan Review Status tool.

Paying a permit online

Greensboro also operates a building-inspection payment page. Contractors can use their contractor code and PIN, while the system also provides an individual-permit payment path using the permit number.

Open Greensboro Building Inspections payments →

Can a Greensboro Homeowner Pull Their Own Permit?

Yes, in qualifying situations. The City’s residential guidance states that a homeowner may obtain a permit to build or modify their own home when the required owner-builder conditions are satisfied.

  • You own and live in the house and can provide proof.
  • You sign the required ownership/permit affidavit.
  • The home is not for sale or lease at the time of the request.
  • For the building-permit pathway described by the City, the house must also remain out of sale or lease for at least one year after completion.
  • You oversee the building work yourself.

For homeowner-performed plumbing, mechanical or electrical work, the City publishes separate owner conditions and states that the owner must personally perform the applicable trade work.

North Carolina contractor-licensing rules also matter. Greensboro’s current plan-review guidance states that when a hired contractor performs construction valued above the applicable $40,000 threshold, the contractor must be appropriately state licensed.

Which Building Codes Apply in Greensboro in 2026?

North Carolina uses a statewide building-code system. This is important in 2026 because the newer 2024 North Carolina code collection has gone through a delayed implementation process.

The North Carolina Office of State Fire Marshal’s current-code resource continues to identify the 2018 North Carolina code family as currently effective while implementation of the 2024 collection remains subject to the state’s statutory transition requirements.

Greensboro’s published construction pages list the following among the codes used for local review:

  • 2018 North Carolina Building Code.
  • 2018 North Carolina Residential Code.
  • 2018 North Carolina Existing Building Code.
  • 2018 North Carolina Energy Conservation Code.
  • 2018 North Carolina Mechanical Code.
  • 2018 North Carolina Plumbing Code.
  • 2018 North Carolina Fuel Gas Code.
  • Applicable North Carolina electrical-code requirements.

Check the North Carolina OSFM current-code page →

Important during a code transition: Do not choose a code edition simply because it is the newest book available online. Confirm which edition governs the permit when the application is filed and whether an alternative-code provision is being used.

Commercial Certificate of Occupancy: What Must Be Finished?

For commercial construction, passing one building inspection does not necessarily mean the property is ready for occupancy. Greensboro’s published Certificate of Occupancy procedure identifies four possible occupancy stages: stocking, temporary, partial and final.

CO type Purpose
Stocking CO Allows limited entry for stocking merchandise when required safety and trade conditions have been met; it does not authorize normal business occupancy.
Temporary CO Allows temporary use when the City’s conditions are satisfied. Greensboro’s published policy states a maximum period of 180 days.
Partial CO May allow an approved portion of a building to be occupied while construction continues elsewhere.
Final CO Issued after required trades are finalized and applicable code violations are corrected.

Depending on the project, final occupancy can require approvals involving building, electrical, plumbing, mechanical, fire prevention, soil erosion, stormwater, landscaping, parking or other site work.

Useful Greensboro-Specific Tips Before You Visit

  • Development Services is in the Melvin Municipal Office Building at 300 W. Washington St., on the Upper Ground level.
  • The City publishes designated free customer parking in the City/County lot near W. Washington and Eugene streets.
  • Have the exact property address and permit or Plan ID before calling. It makes status questions much easier to resolve.
  • For additions, decks, porches and accessory buildings, prepare for site-plan questions early rather than waiting until the building-plan review.
  • Commercial applicants should identify fire, stormwater, landscaping and other occupancy approvals before the end of construction. Waiting until the final inspection can delay opening.

More North Carolina Permit Guides

Permit jurisdiction and fees can change significantly from one North Carolina locality to another. If your project is outside Greensboro, these published guides may help you identify the correct process:

Official Greensboro Building Resources

Official resource Best use
Development Services Main starting point for permits, plan review and development services.
Permits, Fees and Procedures Applications, submittal requirements and fee schedules.
Plan Review & Tracking Upload plans, monitor applicant review, submit revisions, pay and retrieve approved documents.
Plan Review Status Public project-plan status search.
Building Inspections System Permit/inspection lookup and inspection tools.
NC OSFM Current Codes Confirm statewide building-code status and editions.

Greensboro Building Department FAQs

1. What department handles building permits in Greensboro, NC?

City building permits and construction inspections are handled through Greensboro Development Services and the Engineering & Inspections operation. Building-permit assistance is available at 336-373-2155.

2. Do I need a Greensboro building permit for work under $40,000?

Possibly. The $40,000 threshold does not exempt structural work, certain plumbing, HVAC or electrical changes, work involving regulated materials, some roofing work or projects affected by the Fire Code. Check the exact scope before starting.

3. How do I apply for a Greensboro building permit?

Confirm jurisdiction, choose the correct application, prepare required plans and site information, then use Greensboro’s Plan Review & Tracking system for projects requiring electronic plan review. Interior-only residential alterations may use the City’s published in-person process.

4. Can a homeowner pull their own building permit in Greensboro?

Yes, when the City’s owner-builder conditions are met. The homeowner generally must own and occupy the home, provide proof, sign the required affidavit and personally oversee or perform the qualifying work.

5. How much is a Greensboro building permit in 2026?

The City’s currently posted minimum building permit fee is $85, but larger permits are calculated from construction value. Electrical, mechanical and plumbing permits use separate fee schedules, and additional reviews may add charges.

6. How long does Greensboro building plan review take?

The City publishes residential review at about five or more business days when review is needed, while standard commercial review is generally listed at about 14-21 business days. Site-plan approval and corrections can increase the time.

7. How do I schedule a Greensboro building inspection?

Use the City’s online Building Inspections Scheduler or call APRIL at 336-373-2400. APRIL inspection requests must be submitted by 8 p.m. on the previous business day for the requested inspection date.

8. How can I search a Greensboro building permit?

Use Greensboro’s Building Inspections system to look up available permit and inspection records using a permit number or property address. Plan-review status is available through the separate Plan Review Status portal.

9. Which building code applies in Greensboro in 2026?

Greensboro follows North Carolina’s statewide building-code system. Current City and OSFM resources continue to reference the 2018 North Carolina code family while the 2024 code collection moves through its delayed implementation process. Confirm the applicable edition when filing.

10. Does Guilford County issue permits for properties inside Greensboro?

Greensboro operates its own permitting system. Guilford County handles unincorporated areas and certain contracted municipalities. Because a mailing address can be misleading, verify jurisdiction before submitting an application.

Before You Start: 60-Second Checklist

  • Confirm the property is actually under City of Greensboro jurisdiction.
  • Identify building and separate trade permits needed for the project.
  • Check zoning, setbacks, floodplain, historic and site-plan issues early.
  • Download the current City application and submittal requirements.
  • Prepare scaled plans and project-cost information.
  • Verify contractor or owner-builder eligibility.
  • Check the current fee schedule before budgeting.
  • Do not begin regulated work until the permit is issued.
  • Schedule inspections before regulated work is concealed.
  • For commercial projects, plan final occupancy approvals before construction ends.

Independent information notice: USBuilding.org is an independent informational resource and is not the City of Greensboro or Guilford County government. Permit rules, fees, office procedures, code editions and review requirements can change. Use the official links above for final submission, payment and property-specific confirmation.

Leave a Comment